T
E L E P H O N I C S
C
O R P O R A T I O N
TM115007 REV A (04/07)
5-1
USE OR DISCLOSURE OF DATA CONTAINED ON THIS PAGE IS SUBJECT TO THE
RESTRICTION ON THE TITLE PAGE OF THIS DOCUMENT
.
C
O M M U N I C A T I O N
S
Y S T E M S
D
I V I S I O N
CHAPTER 5
TRULINK SUPPORT STATION (TSS)
5.1 OVERVIEW
The TSS is a standalone device that provides the ability to charge the commercially available NiMH
batteries while installed in a 780-1000-001 TPT unit, display Built-in Test (BIT) results and set the
channel on up to six transceivers at one time.
5.2 PHYSICAL
CHARACTERISTICS
The TSS is powered by standard 120VAC, 60Hz power. The AC power cable, Telephonics Part No.
780-3500-001, is supplied with the TSS. The TSS measures 11.75 inches in length by 9.75 inches
wide by 4.75 inches high and weighs approximately 12 pounds. There are six plug-in brackets
located on top of the TSS. Red and green LEDs provide the status indications for each bracket and a
four digit numeric display is used for TPT channel selection. An ON/OFF switch and a pushbutton
reset circuit breaker are located on the side of the TSS. The TSS controls and indicators are shown in
Figure 5.2-1. An enlargement of the display overlay is shown in Figure 5.2-2.
Figure 5.2-1. TSS Controls and Indicator
