Remote Control Touch
User Guide
Datum: 08.12.2015
Seite 52 von 61
RCTouch_UserGuide_V2.1.1.doc
Figure 9.11: Voice note recording stops
9.21.2
Trigger without voice note
Note:
Setting a trigger without voice note is confirmed acoustically. If you do not hear an
acoustic signal, increase the volume (see section 9.12).
Tap on
[Trigger]
to set a trigger on the connected devices.
A tone sequence indicates that a marker was set.
A brief fade-in tells you under which index and timing (date and time) the trigger was
set.
Marker appears on the tab sheet
[Markerlist]
.
Figure 9.12: Marker set
9.22 Switching off device
Press and hold the Home button until the Active LED flashes green.
Active LED pulses green.
