Telemotive AG blue PiraT Mini, User Manual

Page: 36 / 61

Remote Control Touch
User Guide
Datum: 08.12.2015
Seite 36 von 61
RCTouch_UserGuide_V2.1.1.doc
9 Operation
Important:
Only use the tip of the finger to operate the RCTouch.
This chapter describes instructions that are possible using the RCTouch, with the exception of
sections 9.24 Updating firmware and 9.20 Setting and deleting complex triggers.
RCTouch provides the following operating options:

9.10 Actuating function key
Navigate to the tab sheet [Functionkeys] in the application Driver View.
Tap on the desired function key that was previously assigned with a “complex trigger”, see sec-
tion 9.20.

The RCTouch responds according to the <Action> that was set in the configuration
for the <Event> [Key Stroke] using a function key as <Key>.
Index
9.1 Adjusting backlight
Navigate to the tab sheet [General] in the application Settings.
9.1.1 Automatic adjustment
If you want the brightness of the display to adjust automatically, tap on the gray [OFF] switch
under <Auto Brightness>.

Brightness is automatically adjusted.

The blue [ON] switch is active.

Brightness scale with brightness slider is inactive.
9.1.2 Manual adjustment
If you want to adjust the brightness of the display manually, tap on the blue [ON] switch under
<Auto Brightness>.

The gray [OFF] switch is active.

Brightness scale with brightness slider is active.
Swipe the brightness slider to the desired position or
tap on the desired position on the brightness scale.

Brightness is set according to adjustment.

A brief fade-in indicates the new brightness value set in percent.