Remote Control Touch
User Guide
Datum: 08.12.2015
Seite 47 von 61
RCTouch_UserGuide_V2.1.1.doc
9.16 Playing voice note
Note:
If you do not hear an acoustic signal, increase the volume (see section 9.12).
The quality of the recording and playback is dependent on the <Speaker> and <Micro-
phone> settings on the tab sheet [General] (see section 8.3.8).
Navigate to the tab sheet
[Markerlist]
in the application
Driver View.
Tap on the
button in the marker entry.
Voice note of the marker is played.
The following duration display complements the marker entry.
Playback progress
Duration voice note
in *Minute*:*Second*
in *Minute*:*Second*
Duration bar
Figure 9.4: Voice note duration display
If you tap on a second
button while the voice note is played, the playback is stopped and the
second voice note is played.
If you want to stop playing the voice note prematurely, tap on the
button again.
The duration display disappears when the playback of the voice not has ended.
9.17 Scrolling through applications
If the application contains more than one tab sheet, you have the option to scroll.
Note:
In the application
Driver View, there is a risk of setting unwanted triggers when
scrolling through. You should therefore use the tab bar to change the tab sheet.
Swipe the tab sheet horizontally:
to the left
The tab sheet adjacent to the right appears.
to the right
The tab sheet adjacent to the left appears.
If there is no tab sheet adjacent to the left or right, this is indicated by a gray margin on the left
respectively right edge of the display.
