Remote Control Touch
User Guide
Datum: 08.12.2015
Seite 15 von 61
RCTouch_UserGuide_V2.1.1.doc
7.2.5 LEDs
Activity and operating state of the RCTouch are indicated by the LEDs.
Table 7.2: LED behavior
7.2.6 Microphone
The microphone is used to record voice notes on triggers. The voice recording is audible up to a
vehicle speed of 130 km/h.
7.2.7 Touchscreen
The display is used to operate the RCTouch. Only use the tip of the finger to operate it. The
brightness is adjustable.
7.3 Accessories
The RCTouch is supplied with a 2 m Ethernet cable.
Additional accessories are available for purchase. The following accessories are compatible
with the RCTouch:
mounting bracket
various adapter cables, including power cables
Please contact our sales department for more information about the accessories.
The relevant manuals for these enhancements can be found in the Telemotive ServiceCenter.
Activity/operating state
Behavior
Active LED
State LED
device goes to standby
green pulsing
not lighted
in error mode
green light
red light
in operation
green light
not lighted
powered off
not lighted
not lighted
press Home button
brief light-up
not lighted
record voice note
brief light-up
red pulsing, four times
then not lighted
set trigger
brief light-up
not lighted
switch off device
green pulsing
not lighted
switch on device
green flashing
not lighted
update firmware
green light
red light
wake up device
brief light-up
brief light-up
