TeleEye JN308 User Manual Download Page 9

Page: 9 / 80

•

Support saving recorded files with AVI standard format to a remote computer through Internet

RECORD & PLAYBACK

•

Recording modes: Manual, Schedule, Motion detection and Sensor alarm recording

•

Support cycle mode after HDD full

•

Resolution, frame rate and picture quality are adjustable

•

4/8/16 audio channels available

•

Two record search mode: time search and event search

•

Support 4/8/16 screen playback simultaneously

•

Support deleting and locking the recorded files one by one

•

Support remote playback in Network Client through LAN or Internet

ALARM

•

4 channel alarm output and 4/8/16 channel alarm input available

•

Support schedule for motion detection and sensor alarm

•

Support pre-recording and post recording

•

Support linked channels recording once motion or alarm triggered on certain channel

•

Support linked PTZ preset, auto cruise and track of the corresponding channel

PTZ CONTROL

•

Support various PTZ protocols

•

Support 128 PTZ presets and 8 auto cruise tracks

•

Support remote PTZ control through internet

SECURITY

•

Customize user right: log search, system setup, two way audio, file management, disk management, remote login, live view,

manual record, playback, PTZ control and remote live view

•

Support 1 administrator and 63 users.

•

Support event log recording and checking, unlimited events

Summary of Contents for JN308
















































































Search results

Summary of Contents for JN308

Reviews:

Brands by name

Popular brands

TeleEye JN308, User Manual

Search results

Summary of Contents for JN308

Reviews:

Brands by name

Popular brands