50
Disconnect:
Disconnect the online users to access DVR. If this function is used by the admin, the particular PC will not be able
to access the device for five minutes. .
6.1.6 Record Information
In this tab, a user can check resolution, ftp and record status including sensor based recording, motion based recording,
manual recording or schedule recording.
6.2 Manual Alarm
In this interface, user can trigger a manual alarm.
6.3 Disk Management
1.
1.
1.
1.
Format the disk
Step 1: Enter into disk management tab.
Note: Please format the hard disk before recording. If not formatted, it will show the status of the disk-free space, and total space at the
bottom of screen.
Step 2: Click Refresh button to refresh the disk information in the list box;
Step 3: Select a hard disk and click Format button to start format.
Note
:
All recorded files in the hard disk will be lost once it is formatted.
2.
2.
2.
2.
Advanced
User may check model, S/N, firmware, health status of the disk in this interface. User also can monitor the temperature, internal
circuit, dielectric material of the disk, analysis the potential problems of the disk and warn so as to protect its data.
6.4 Upgrade
The DVR can be upgraded by using USB flash drive. Get the upgrading software from your vendor when there is a new
software version.
Summary of Contents for JN308
Page 25: ...25 Fig 3 3 Live Playback...
Page 33: ......
Page 49: ...DVR User Manual 41 Fig 4 42 Cruise Setting Modify Cruise Line Fig 4 43 Track Setting...
Page 74: ...66...
