TeleEye JN308, User Manual

Page: 39 / 80

31
Fig 4-22 Sensor-Schedule
4.5.2 Motion
Motion includes two sub menus: motion and schedule.
The steps to set up motion alarm are as follows:
Step1: Enter into Menu Setup Alarm Motion tab. Refer to Fig 4-23:
Fig 4-23 Alarm Configuration-Motion
Step2: Enable motion alarm, set alarm hold time which refers to the time till which the system will wait for further detection of
motion. Eg. If the holding time is set to 10 seconds, once the system detects a motion, it will go into alarm but would not detect
any other motion alarm (specific to channel) until 30 seconds. If there is other motion detected during this period, it is