User Manual 20
EAR99 technology subject to restrictions on copyrights page.
2.
3. After setting the IP value, press the multi-function knob or press the Fine
button for 1 second or longer to make the setting effective, then press the
left / right arrow buttons repeatedly to move the cursor to the DHCP line.
Turn the knob to set DHCP to ON or OFF, then press the multi-function knob
or press the On/Off button briefly to turn on/off the DHCP.
ON:
The power supply will automatically set the IP address, subnet mask
and gateway according to the current local access network.
OFF:
The user can manually set the IP address, subnet mask and gateway.
• Press the left/right arrow button to change the position of cursor.
• Rotate the knob or press the left and right arrow buttons for 1 second or
longer to change the data.
• Press Fine button to change the highlighted digit.
• Press the knob or press the Fine button for a longer period to save the
setting (all settings will take effect only if the knob is pressed or the Fine
button is pressed for 1 second or longer.)
4. Press IP/Save again to exit the network setting interface and return to
the main screen.
