19 User Manual
EAR99 technology subject to restrictions on copyrights page.
b) Press the Fine button to select the cursor’s position, then rotate the
knob to adjust the parameter.
3
Select
the 4-wire mode
Press the Vsense button, the button will light up. The power supply
screen will show ‘4 wire’ on the display.
4
Enable the output
Press the on/off button, the button is lit and the power supply display
shows “on”.
Note:
In 4-wire mode, the maximum compensation voltage of the power supply
is 1 V. When the voltage difference between the Output terminal and the Sense
terminal is more than 1 V, the instrument will turn off automatically.
2.4 Configuration of LAN interface
The T3PS16081P / 30051P support USB Device and LAN interfaces. You can
remotely control the power supply through these interfaces. When using the
LAN interface, first set the interface parameters.
Operation methods:
1. Use the network cable to connect the LAN port on the rear panel with the
network where the computer or computers are located.
2. Press IP/Save briefly to enter the network setting interface.
