Teledyne Slocum G2 Operator Training Manual Download

Page: 3 / 50

Slocum G2 Glider Operators Training Guide

TELEDYNE WEBB RESEARCH

Rev. 06/12

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Glider Operation and Maintenance Training. . . . . . . . . . . . . . . . . . . . . . . 1
Internet Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Notes for Ballasting and Lab Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Common Lab Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Pre-mission Checkouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

On the Beach, Deck and/or outside at the Lab  . . . . . . . . . . . . . . . . . . . . . . .  9
Science Sensor Checkout  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10
Transporting the glider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11
In the Water  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11

Deploying the Glider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Large Ship Deployment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Recovering the Glider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Packing the Glider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Dockserver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Glider Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  18
Glmpc Terminal  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  19
Data Visualizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  19
Dockserver Java FTP Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  20

Configure Communications with the Terminal Program (ProComm Plus)
21

Surface Dialog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

File Manipulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Transferring Files to and from the Glider . . . . . . . . . . . . . . . . . . . . . . . . . . .  23
Transferring Files from the Glider. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  23
Transferring Files to the Glider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  23

Glider Do’s and Don’ts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Do’s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Don’ts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Mission Files (.mi and .ma) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Appendix A: Glider Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Appendix B: Worksheets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Summary of Contents for Slocum G2



















































Search results

Summary of Contents for Slocum G2

Reviews:

Related manuals for Slocum G2

Brands by name

Popular brands

Teledyne Slocum G2, Operator Training Manual

Search results

Summary of Contents for Slocum G2

Reviews:

Related manuals for Slocum G2

Brands by name

Popular brands