Slocum G2 Glider Operators Training Guide
TELEDYNE WEBB RESEARCH
35
Rev. 06/12
Appendix A: Glider
Commands
To list all commands that are available, type
help
from a GliderDOS prompt. These
commands are also listed in the table below. For examples of how commands are
used, see the “Sample Mission and Comments” section in Appendix A of the
Slocum
G2 Glider Operators Manual
.
Command Name
Syntax and/or Description
attrib
ATTRIB [+ - RASH] [d:][p][name]
ballast
BALLAST ?; for help
boot
boot [PICO][PBM][APP]
callback
callback <minutes til callback>
capture
capture [d:][p]fn [/Dx/B/N/E]
cd
Change directory
chkdsk
CHKDSK [d:][p][fn] [/F][/I] *
clrdeverrs
Zero device errors
consci
consci [-f rf|irid]; console to science
copy
copy source dest [/V]
cp
CP <src_path> <dest_path>; copies a file
system branch
crc
Computes CRC on memory
date
DATE [mdy[hms[a|p]]] /IEUMCP]
dellog
DELLOG ALL MLG DBD SBD
del
DEL [drv:][pth][name] [/P]
devices?
Prints device driver information
df
Prints disk space used and disk space free
dir
DIR [d:][p][fn] [/PWBLV4A:a]
dump
DUMP file[start[,end]] *
erase
ERASE [drv:][pth][name] [/P] *
Summary of Contents for Slocum G2
Page 49: ......
