Teledyne Linea GigE 2K, User Manual

Page: 82 / 132

80
•
Operational Reference Linea GigE Series Camera
Event Control Feature Descriptions
The following table describes these parameters along with their view attribute and minimum
camera firmware version required. Additionally the Device Version column will indicate which
parameter is a member of the DALSA Features Naming Convention (denoted by DFNC), versus the
GenICam Standard Features Naming Convention (SFNC not shown).
The Device Version number represents the camera software functional group, not a firmware
revision number. As Linea GigE capabilities evolve the device version tag will increase, therefore
identifying the supported function package. New features for a major device version release will be
indicated by green text for easy identification.
Display Name Feature & Values Description Device
Version
& View
Timestamp Latch Cmd timestampControlLatch Latch the current timestamp internal counter value
in the timestampValue feature.
1.00
Expert
DFNC
Timestamp Value timestampValue Returns the 64-bit value of the timestamp counter.
(RO)
1.00
Expert
DFNC
TimeStamp Source timestampSource Specifies the source used as the incrementing
signal for the Timestamp register.
1.00
Expert
DFNC
Internal Clock InternalClock The timestamp source is generated by the camera
internal clock. Refer to the
timestampTickFrequency feature for the time
Timestamp Tick
Frequency(in Hz)
timestampTickFrequency Indicates the number of timestamp ticks (or
increments) during 1 second (frequency in Hz).
(RO)
1.00
Expert
DFNC
Timestamp Reset Cmd timestampControlReset Resets the timestamp counter to 0. (WO)
1.00
Expert
DFNC
Event Selector EventSelector Select the Event to enable/disable with the
EventNotification feature.
1.00
Expert
Start of Acquisition AcquisitionStart Event sent on control channel on acquisition start.
End of Acquisition AcquisitionEnd Event sent on control channel on acquisition end.
Start of Frame FrameStart Event sent on control channel on an Active Frame.
This occurs with the start of the exposure delay of
the first line of the frame.
End of Frame FrameEnd Event sent on control channel on an Active Frame
end.
Valid Frame Trigger ValidFrameTrigger Event sent on control channel when a valid frame
trigger is generated.
Invalid Frame Trigger InvalidFrameTrigger Event sent on control channel when a frame
trigger occurs in an invalid Trigger region.
Therefore the trigger is rejected and no frame
acquisition occurs.
Image Lost ImageLost Event sent on control channel when an image is
lost due to insufficient memory.
Invalid Line Trigger InvalidLineTrigger Event sent on control channel when a line trigger
occurs in an invalid Trigger region. Therefore the
trigger is rejected and no frame acquisition occurs.
Line Trigger Overlap LineTriggerOverlap Event sent on control channel when a line trigger
occurs in an invalid trigger region and was delayed
by the camera into a valid region.
Line 1 Line1 Event sent on control channel when a state change
occurs on line 1.
Line 2 Line2 Event sent on control channel when a state change
occurs on line 2.