Teledyne Linea GigE 2K, User Manual

Page: 66 / 132

64
•
Operational Reference Linea GigE Series Camera
Cycling Preset Mode Control Feature Description
The following table describes these features along with their view attribute and device version.
When a Device Version number is indicated, this represents the camera software functional group,
not a firmware revision number. As Linea GigE capabilities evolve the device version will increase,
therefore identifying the supported function package. New features for a major device version
release will be indicated by green text for easy identification.
The description column will indicate which feature is a member of the DALSA Features Naming
Convention (denoted by DFNC), versus the GenICam Standard Features Naming Convention (SFNC
not shown).
Display Name Feature & Values Description Device Version
& View
Cycling Preset Mode cyclingPresetMode Sets the Cycling Presets module mode. V1.00
Expert
DFNC
Off Off Disable the Cycling Preset module.
Active Active Enable the Cycling Preset module.
Cycling Preset Count cyclingPresetCount Specifies the number of Presets to use.
V1.00
Expert
DFNC
Cycling Preset
Incremental Source
cyclingPresetIncrementalSource Specifies the source that increments the currently
active cycling preset.
V1.00
Expert
DFNC
None None Feature cyclingPresetCurrentActiveSet is used to
select the current active set.
Line1 Line1 Increment on Line1.
Line2 Line2 Increment on Line2.
Line3 Line3 Increment on Line3.
Line4 Line4 Increment on Line4.
Counter1 End Counter1End Increment on the end of Counter 1.
Counter2 End Counter2End Increment on the end of Counter 2.
Timer1 End Timer1End Increment on a Timer1 end.
Timer2 End Timer2End Increment on a Timer2 end.
Valid Frame Trigger ValiFrameTrigger Increment on a Valid Frame Triggers
End of Frame FrameEnd Increment on end of frames.
Start of Exposure ExposureStart Increment on start of exposure.
Cycling Preset
Incremental Mode
cyclingPresetIncrementalMode Sets the synchronization point after a increment
trigger occur. This is use when the increment
source is an line, counter or timer.
V1.00
Expert
DFNC
Line NextLine The next set will take effect when the next line
acquisition will start.
Frame NextFrame The next set will take effect when the next line
acquisition will start.
Cycling Preset Repeater cyclingPresetRepeater Specifies the required number of cycling preset
increment events (generated by the Cycling Preset
Incremental Source) to increment the index of the
Cycling Preset Current Active Set.
V1.00
Expert
DFNC
Cycling Preset Reset
Source
cyclingPresetResetSource Specifies the source that resets the currently active
preset. On reset the current preset index is set to
1.
V1.00
Expert
DFNC
Line1 Line1 Increment on Line1.
Line2 Line2 Increment on Line2.
Line3 Line3 Increment on Line3.
Line4 Line4 Increment on Line4.
Counter 1 End Counter1End Increment on Counter1 end.