Teledyne Linea GigE 2K, User Manual

Page: 76 / 132

74
•
Operational Reference Linea GigE Series Camera
Internal Test Image Generator
The Linea GigE camera includes a number of internal test patterns which easily confirm camera
Ethernet connections or driver installations, without the need for a camera lens or proper lighting.
The patterns are subject to Linea GigE processing such Binning functions.
Use CamExpert to easily enable and select any test pattern from the drop menu while the camera
is not in acquisition mode. Select live grab to see the pattern output.
Acquisition and Transfer Control Category
The Linea GigE Acquisition and Transfer controls, as shown by CamExpert, groups parameters used
to configure the optional acquisition modes of the device. These features provide the mechanism to
either have acquisitions coupled to transfers (basic mode) or to decouple acquisitions from both the
camera transfer module and the host transfer module.
Parameters in gray are read only, either always or due to another parameter being disabled.
Parameters in black are user set in CamExpert or programmable via an imaging application.
Features listed in the description table but tagged as Invisible are usually for Teledyne DALSA or
third party software usage—not typically needed by end user applications.
Acquisition and Transfer Control Feature Descriptions
The following table describes these parameters along with their view attribute and minimum
camera firmware version required. Additionally the Device Version column will indicate which
parameter is a member of the DALSA Features Naming Convention (denoted by DFNC), versus the
GenICam Standard Features Naming Convention (SFNC not shown).
The Device Version number represents the camera software functional group, not a firmware
revision number. As Linea GigE capabilities evolve the device version tag will increase, therefore
identifying the supported function package. New features for a major device version release will be
indicated by green text for easy identification.