Teledyne Genie Monochrome Series M1280, User Manual

Page: 61 / 279

Nano Series GigE Vision Camera Genie Nano Specifications
•
59
Trigger to Exposure Minimum delay
(Reset Exposure Alignment)
3 µs
Trigger to Exposure Start jitter (best
case with Synchronous Exposure
Alignment)
Up to 1 line time
Trigger to Exposure Start jitter
(Reset Exposure Alignment) *
0 µs
Exposure Time Minimum
(see “exposureTimeActual” in Sensor
Control )
87 µs
(increment steps of 1µs)
Min. Time from End of Exposure to
Start of Next Exposure (second
frame)
49 µs – Normal Readout
47 µs – Fast Readout
Horizontal Line Time:
9 µs – Normal Readout
7 µs – Fast Readout
Readout Time
10831 µs – Normal Readout for 1920 x 1200
Add 76µs when overlapping Exposure and Readout
8428µs µs – Fast Readout for 1920 x 1200
Add 64µs when overlapping Exposure and Readout
Specifically: ( Horizontal line time at current resolution * number of lines ) + (3 *
( line time of the 2590 model ))
Auto-Brightness Yes , with Auto-Exposure and AGC (FPGA Gain)
Black offset control Yes (in DN)
Gain Control In-sensor Analog Gain (1.0x to 8x) in 11 gain steps
(1.0, 1.14, 1.33, 1.6, 2.0, 2.29, 2.67, 3.2, 4.0, 5.33, 8.0)
In-sensor Digital Gain (1x to 32x) in 0.01x steps
In-FPGA Digital Gain (1x to 4x) in 0.007x steps
Binning Support Yes In-FPGA
(summing and average,
2x2, 4x4 )
Yes In- Sensor
(averaging 2x2)
No
Decimation Support No
Defective Pixel Replacement Yes, up to 512 positions
Image Correction No
Image Flip Support Yes, In-Sensor, Vertical Only
Multi-ROI Support Yes, in Sensor, up to 16 ROI (mutually exclusive with binning)
On-Board Image Memory 90MB
Output Dynamic Range (dB) 62.1 dB (in 10-Bit Pixel Format)
SNR (dB) 39.8 dB (in 10-Bit Pixel Format)
* Note: The actual internal minimum exposure may be different than what is programmed. Use the feature
“
exposureTimeActual” from the
Sensor Control category to read back the actual sensor exposure. The exposure start sensor event is delayed 4 µs from the actual start.