Teledyne Genie Monochrome Series M1280, User Manual

Page: 44 / 279

42
•
Genie Nano Specifications Nano Series GigE Vision Camera
Actual Exposure Time Minimum
(see “exposureTimeActual”
in Sensor Control )
22µs
(1 line time + 14.26 us)
(in 7.89µs steps)
24µs (1 line time + 14.26 us)
(in 9.72µs steps)
Min. Time from End of Exposure to
Start of Next Exposure
16 lines –14.26µs
(112µs)
16 lines – 14.26µs
(141.3µs)
Horizontal Line Time:
Normal operation
(with In-Sensor Binning enable)
7.89µs
(4.95µs)
9.72µs
(5.27µs)
Readout Time (H Line Time) x (lines in frame +39) in μs
Auto-Brightness Yes , with Auto-Exposure and AGC (FPGA Gain or Sensor Gain)
Black offset control Yes (in DN)
Gain Control In-sensor Analog Gain (1.0x to 251x)
Binning Support No
Decimation Support No
Defective Pixel Replacement Yes , up to 512 pixel position
Image Correction no
Image Flip Support Yes, In-Sensor, Vertical and Horizontal
Multi-ROI Support Yes, In-Sensor, up to 16 ROI (mutually exclusive with in-sensor binning)
On-Board Image Memory 220MB
Output Dynamic Range (dB) 56.43 76.46 dB (in 8-Bit Pixel Format)
SNR (dB) 33.01 39.38 dB (in 8-Bit Pixel Format)
* Limited to the Genie Nano Architecture:
~250MB/sec Sustained into the TurboDrive Engine achieved using 1500 Byte Packet Size
Firmware Files for Model C4060
The latest firmware files for all Nano models are available on the Teledyne DALSA support web site:
http://www.teledynedalsa.com/imaging/support/downloads/firmware/
The firmware files for this model are listed below. The xx denotes the current build number.
C4060
•
Bayer Output
“Genie_Nano_Sony_IMX25x_3.2M-5.1M-9M-12M _Bayer_STD_Firmware_8CA18.xx.cbf”
• High Sensitivity Bayer Output
“Genie_Nano_Sony_IMX25x_3.2M-5.1M-9M-12M _Bayer_HSD_Firmware_8CA18.xx.cbf”
• RGB Output
“Genie_Nano_Sony_IMX25x_3.2M-5.1M-9M-12M _RGB_Firmware_8CA18.xx.cbf”