Teledyne Genie Monochrome Series M1280, User Manual

Page: 31 / 279

Nano Series GigE Vision Camera Genie Nano Specifications
•
29
On-Board Image Memory 90MB
Output Dynamic Range (dB) 76.4 dB (in 12-Bit Pixel Format)
SNR (dB) 39.6 dB (in 12-Bit Pixel Format)
* Limited to the Genie Nano Architecture:
~250MB/sec Sustained into the TurboDrive Engine achieved using 1500 Byte Packet Size
Firmware Files for Models 2020
The latest firmware files for all Nano models are available on the Teledyne DALSA support web site:
http://www.teledynedalsa.com/imaging/support/downloads/firmware/
The firmware files for these models are listed below. The xx denotes the current build number.
M2020
•
Standard
“Genie_Nano_Sony_IMX264-265_3.2M-5.1M_Mono_STD_Firmware_9CA18.xx.cbf”
C2020
•
Bayer Output
“Genie_Nano_Sony_IMX264-265_3.2M-5.1M_Bayer_STD_Firmware_ACA18.xx.cbf”
•
RGB Output
“Genie_Nano_Sony_IMX264-265_3.2M-5.1M_RGB_Firmware_ACA18.xx.cbf”
Specifications: M2050
Supported Features Nano-M2050
Resolution 2064 x 1544
Sensor Sony IMX252 (3.2M)
Pixel Size 3.45 µm x 3.45 µm
Shutter type Full frame electronic global shutter function
Firmware option
(Field programmable)
High Sensitivity Design Standard Design
Full Well charge; dependent on
Firmware Design Loaded
2750e- (max) 11ke (max)
Sensitivity to Saturation 4x 1x
Max. Internal Frame Rate
Full resolution
143 fps 116 fps
Maximum Sustained Frame Rate
Output ( with TurboDrive v1 ) *
82 fps (8-bit)
Maximum Sustained Frame Rate
Output ( without TurboDrive )
38 fps (8-bit)
Pixel Data Formats Mono 8-bit
Trigger to Exposure Minimum delay
(Synchronous Exposure Alignment)
2 line time
(8.8 µs)
2 line time
(10.8 µs)
Trigger to Exposure Minimum delay
(Reset Exposure Alignment)
0 µs
Trigger to Exposure Start jitter (best
case with Synchronous Exposure
Alignment)
Max 1 line
(0 to 4.4µs)
Max 1 line
(0 to 5.4µs)