Teledyne Genie Monochrome Series M1280, User Manual

Page: 201 / 279

Nano Series GigE Vision Camera Operational Reference
•
199
Display Name Feature & Values Description Device Version
& View
Device Link Selector DeviceLinkSelector Selects which Link of the device to control
1.00
Expert
Device Link Throughput
Limit
DeviceLinkThroughputLimitMode When disabled, lower level TL specific
features are expected to control the
throughput. When enabled,
DeviceLinkThroughputLimit controls the
overall throughput.
1.00
Guru
Device Link Throughput
Limit
DeviceLinkThroughputLimit Limits the maximum bandwidth of the
data that will be streamed out by the
device.
1.03
Guru
Stream Channel Selector GevStreamChannelSelector Selects the stream channel to control. 1.00
Expert
Device Link Speed GevLinkSpeed Indicates the transmission speed
negotiated by the given network interface.
1.00
Expert
PacketSize GevSCPSPacketSize Specifies the stream packet size in bytes
to send on this channel.
1.00
Expert
Interpacket Delay GevSCPD Indicates the delay (in µs) to insert
between each packet for this stream
channel. Note that Interpacket delay
becomes a Read-Only value when the
feature “Device Link Throughput Limit” is
enable.
1.00
Expert
Packet Resend Buffer Size devicePacketResendBufferSize Indicates the amount of memory to
reserve in Mbytes for the packet resend
buffer. Changes in reserved memory
affects total memory available for
acquisition buffering.
1.00
DFNC
Guru
IP Configuration Status GevIPConfigurationStatus Reports the current IP configuration
status. (RO)
1.00
Guru
None None Device IP Configuration is not defined.
PersistentIP PersistentIP Device IP Address Configuration is set to
Persistent IP (static).
DHCP DHCP Device IP Address Configuration is set to
DHCP (Dynamic Host Configuration
Protocol). Network requires a DHCP
server.
LLA LLA Device IP Address Configuration is set to
LLA (Link-Local Address). Also known as
Auto-IP. Used for unmanaged networks
including direct connections from a device
to a dedicated NIC.
ForceIP ForceIP Device IP Address Configuration is set to
ForceIP. Used to force an IP address
change.
Current IP Address GevCurrentIPAddress Reports the IP address for the given
network interface.
1.00
Beginner
Current Subnet Mask GevCurrentSubnetMask Reports the subnet mask of the given
interface.
1.00
Beginner
Current Default Gateway GevCurrentDefaultGateway Reports the default gateway IP address to
be used on the given network interface.
1.00
Beginner
Current IP set in LLA GevCurrentIPConfigurationLLA Controls whether the LLA (Link Local
Address) IP configuration scheme is
activated on the given network interface.
1.00
Guru
Current IP set in DHCP GevCurrentIPConfigurationDHCP Controls whether the DHCP IP
configuration scheme (Dynamic Host
Configuration Protocol) is activated on the
given network interface.
1.00
Guru
Current IP set in
PersistentIP
GevCurrentIPConfigurationPersistentIP Controls whether the PersistentIP
configuration scheme is activated on the
given network interface.
1.00
Guru
Primary Application IP
Address
GevPrimaryApplicationIPAddress Returns the IP address of the device
hosting the primary application. (RO)
1.00
Guru