Teledyne Foxy R1, Instruction Manual

Page: 66 / 102

Foxy
®
R1 and Foxy
®
R2 Fraction Collectors
Section 4 Serial Command Control
4-6
Unsupported Miscellaneous Commands T h e f o l l o w i n g
serial commands are not supported by the Foxy R1 and R2
fraction collector.
• DISPLAY
• KEY=keys
These commands were available for earlier fraction collector
models. Do not use them with the Foxy R1 and R2 fraction col-
lectors.
4.5.2 Immediate Control
Commands
COLLECT The unit resumes collecting fractions after a
DRAIN
command if this command is given during a run. Oth-
erwise, this command will instruct the fraction collector to move
the drop former over the tubes and open the valve. See also the
DRAIN command.
DETECTOR
The unit responds to this command with the current peak
detector input value in volts.
DRAIN This command halts collecting. If executed during a
run, it is the same as touching the
Waste
icon. The three-way
valve diverts the flow to waste. See also the COLLECT
command.
HOME The unit will re-home itself to verify position, even if it
is already at home position.
NEXTTUBE The unit will advance the current tube number
one tube.
Example: Command: COLLECT
Response: (none)
Example: Command: DETECTOR
Response: DETECTOR=0.00014
Example: Command: DRAIN
Response: (none)
Example: Command: HOME
Response: (none)
Example: Command: NEXTTUBE
Response: (none)