Teledyne Foxy R1, Instruction Manual

Page: 63 / 102

Foxy
®
R1 and Foxy
®
R2 Fraction Collectors
Section 4 Serial Command Control
4-3
CUE
without an operand returns the current setting.
ECHO=n This command enables or disables echoing of char-
acters received. Echoing can be used to verify correct reception of
characters.
ECHO=1
will enable the echoing,
ECHO=0
will
disable it.
ECHO=0
is set when unit is switched to
OPERATE
.
ECHO
without an operand returns the current setting.
HELP The unit will respond to this command with a list of
valid command names.
Combining the HELP command with a valid command using the
“$” symbol will return more information for select commands.
IDENTIFY This commands returns information identifying
the unit.
Example: Command: CUE=1
Response: >
Example: Command: CUE
Response: CUE=1
Example: Command: ECHO=1
Response: (none)
Example: Command: ECHO
Response: ECHO=1
Example: Command: HELP
Response: CLEAR COLLECT…
Example: Command: HELP$BAUD
Response: sets & queries the serial port baud
rate…
Example: Command: IDENTIFY
Response: SERIES=3870-010, FoxyR1,
FRAC. COL., REV a, 01.00.00