Teledyne AutoInjector Module, Installation And Operation Manual

Page: 45 / 74

Automation
Section 3 The AutoSampler Module
3-23
3. Once the queue is complete, select the R
UN
tab and press
the P
LAY
button. Alternatively, you can select the “=” menu
on the first unfinished run and select the R
UN
option.
4. While a separation is in process, the Q
UEUE
screen can be
accessed to add samples to the queue. Samples that have
been completed cannot be edited. They can be viewed, how-
ever, by touching the file name corresponding the that run.
Note
The number of rows in the queue is limited to 28. Additional
samples can be added by deleting completed rows from the
queue. If there are more rows than can be displayed on
screen, up and down arrows are displayed at the top and bot-
tom of the screen which allow access to hidden rows.
5. Once the entire queue has completed, the R
ESULT
screen is
displayed with the last separation. To easily view previous
separations, select the separation on the Q
UEUE
screen or
select F
ILE
| O
PEN
to view previous separations.
If a sample had multiple injections, the run sequence will be dis-
played within the F
ILE
| O
PEN
dialogue under a single name pre-
ceded by a “+” symbol. This symbol indicates there are multiple
injections with the same base file name. Names are appended
with “-I(#)” to signify the numerical order of the separation. See
Table 3-2 for an example.
Number of Injections Used in conjunction with the S
AMPLE
V
OLUMES
column to determine the
size of each injection.
Start Tube Allows the user to optimize rack
usage by sharing the racks for multi-
ple samples or placing each sam-
ple’s result into individual racks to
support multiple users.
Table 3-2 Naming Scheme
Name Description
Sample Run (user-defined; single
injection run) First injection.
Sample Run I1 (system-appended;
multiple injection run) First injection.
Sample Run I2 Second injection.
Sample Run I3 Third injection.
Table 3-1 Queue Tab Columns