Teledyne 6000A, Operating Instructions Manual

Page: 17 / 94

Photometric Analyzer Part I: Control Unit
Part I: 2-3
Teledyne Analytical Instruments
Figure 2-2: Required Front Door Clearance
Allow clearance for the door to open in a 90-degree arc of radius 11.75
inches. See Figure 2-2.
2.3 Electrical Connections
Figure 2-3 shows the Control Unit interface panel. Connections for
power, communications, and both digital and analog signal outputs are
described in the following paragraphs. Wire size and maximum length data
appear in the Drawings at the back of this manual.
Figure 2-3: Interface Panel of the Model 6000A Control Unit
For safe connections, ensure that no uninsulated wire extends
outside of the terminal blocks. Stripped wire ends must insert completely
into terminal blocks. No uninsulated wiring should come in contact with
fingers, tools or clothing during normal operation.
7.
12
5 i
n