Application Note
FSA-028 (April 2011)
FSA-028 (April 2011)
page 9 of 22
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
NOTE.
It is strongly advised to use PlanADCP to create your original Scirpt File.
d. Set a delayed start using the ‘TF’ command to at least 1hour in the future to
leave you enough time to setup your ADCP and CTD and then plug the
between them. It is always advised to set the WHADCP clock to
your PC clock in the following steps in WinSC.
e. Save your new script file which is now ready to setup your ADCP to collect CiT-
aDeL CTD data.
2.3.1
Load Script File
Load your Script file as usual using your preferred communication tool:
•
BBTalk – Used ‘F2’ key on your keyboard to start sending a script file.
•
WinSC – Use the Steps described below:
a. Run WinSC.
b. When WinSC opens a new dialog window will open:
c. Click Cancel
d. Then select New Deployment:
