Application Note
FSA-028 (April 2011)
FSA-028 (April 2011)
page 15 of 22
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
m. Select your file deployment name
n. Remove the power cable.
Optional:
a. Before removing the power cable, Select View > Terminal
b. Press Enter to verify in which operation mode you are:
•
If you obtain a data stream for each carriage return then you are in run
mode => Send ***O and enter to go to Open Mode. Press Enter and
the CTD should reply “Open Mode”.
•
If you obtain a message reply “Open Mode” for each carriage return,
then go directly to the next step.
c. Send ROP to see which channels are set for output
d. Send CHx=ON to enable one of the channel output to be added to the CiTaDeL
CTD stream which will be stored in the WH ADCP (Where x= channel number)
e. Send ***E to save your changes
f. Send ***R to place the ADCP back in Run Mode
g. Send MODE to verify that the system is in Run Mode, if not then go back to the
previous step.
•
Remove the power cable upon verifying that your CiTaDeL CTD is in
Run Mode
