TELEDYNE OLDHAM SIMTRONICS OLCT 80 d, User Manual

Page: 21 / 116

OLCT 80
GAS TRANSMITTER
USER MANUAL
NPO80GB
Revision F.1
15
Menu Sub-menu Description Page
RELAIS 1
Configure the conditions that trigger
the 1
st
alarm relay.
35
RELAIS 2
Configure the conditions that trigger
the 2
nd
alarm relay.
36
RELAIS D
Configure the conditions that trigger
the fault relay. 36
PG SERIE
Configure the serial connection and
the backlighting of the LCD display. 37
PG PASSW.
Define the code to access the
configuration menus. 40
MAINT
Display maintenance-related settings. 41
CALIBRA
Display the 3 calibration sub-menus
for the main sensor, the
ANA1 sensor
and the
ANA2 sensor. Access code
required to access this menu.
43
Cal sensor
Calibrate the main sensor. 44
Chgt sens.
Reset the stored wear rate to zero
after replacing the main sensor. 45
Cal CH1
Calibrate the
ANA1 sensor.
46
Cal CH2
Calibrate the
ANA2 sensor.
47
4-20 mA
Override the 4-20 mA output. 47
INFOS Display the serial number, software
version, etc.
48
TEST
Perform gas test without triggering
relays. 49