OLCT 80
GAS TRANSMITTER
USER MANUAL
46
NPO80GB
Revision F.1
Tree structure
Figure 33: the
Sensor Replacement
menu. Press
ESC
repeatedly to return to the reading display.
Menu
Description
Chgt sens.?
Confirm that you want to begin the wear rate reset procedure for the main sensor.
Init sens ?
•
ENTER: reset the wear rate value for the main sensor and return to the CALIBRA menu.
•
ESC: cancel the reset of the wear rate value for the main sensor and return to the CALIBRA
menu.
3.10.3
Cal CH1
Calibrate the sensor connected to the
ANA1 inlet (see the documentation for this sensor) with the
relays blocked for 5 minutes. The two indicators lights ( and
) will blink.
The AL1 and AL2 alarm indicator lights will be activated if the threshold is exceeded. They will
turn off automatically once the value falls below the setpoint.
How to access
See Figure 31.
Summary of Contents for OLCT 80 d
