TELEDYNE OLDHAM SIMTRONICS OLCT 80 d, User Manual

Page: 24 / 116

OLCT 80
GAS TRANSMITTER
USER MANUAL
18 NPO80GB
Revision F.1
3.5 Index of menu settings
This section lists the programmable settings and the corresponding pages in this manual.
Setting Menu See page
4-20 mA
4-20 mA – control the output current for
testing purposes 4-20 mA 47
4-20 mA – manage the analog output
signal of the
OLCT 80
PROG. > PG SENSOR > PG SENSOR > Normal /
Synth / CAPEX 26
Display
Display readings AFF.MES 21
24 VDC power supply
Display current voltage MAINT > Entry V 41
Sensor – main sensor
Sensor – verify PROG. > PG SENSOR > PG SENSOR > OvR Lock Y 26
Sensor – display PROG. > PG SENSOR > PG SENSOR > Display /
Principal / Secondary 26
Sensor – calibration CALIBRA > 43
Sensor – on/off PROG. > PG SENSOR > PG SENSOR > ON/OFF 26
Sensor – adjust sensitivity CALIBRA > Cal sensor > Adjust. ‘S’ 44
Sensor – zeroing CALIBRA > Cal sensor. > Adjust. ‘0’ 44
Sensor – wear rate (display) MAINT > User rate% 41
Sensor – replace sensor CALIBRA > Chgt sens. 45
Sensor – reading integration time PROG. > PG SENSOR > PG SENSOR > coef none 25
Sensor – 4-20 mA output type
PROG. > PG SENSOR > PG SENSOR > Normal /
Synth / CAPEX
25
Sensor – input signal value MAINT > Signal V 41
Sensor – input voltage value MAINT > Entry V 41
Main sensor – slave number PROG. > PG SERIE > Slave Sens 37
Date
Date DATE TIME 22
ANA1 sensor
ANA1 sensor – input voltage value MAINT > Meas CH1 V 41
ANA1 sensor – acknowledge reading or
function PROG. > PG SENSOR > PG ANA1 >
Measure/Acquit 27
ANA1 sensor – display PROG. > PG SENSOR > PG ANA1 > Display /
Principal / Secondary 27
ANA1 sensor – range minimum PROG. > PG SENSOR > PG ANA1 > Zero in V 27
ANA 1 sensor – measurement range PROG. > PG SENSOR > PG ANA1 > Gamme 27
ANA1 sensor – range maximum PROG. > PG SENSOR > PG ANA1 > Zero in V 27
ANA1 sensor – verify PROG. > PG SENSOR > PG ANA1 > Gamme 27