Teledyne e2V EV71YC1CNT2010-BA0, User Manual

Page: 27 / 68

UM_NBASE-T_C
OLOUR
REV.E 09/2018 P
A G E
| 27
GenCP
address
GenICam Register
Size
(Bytes)
R/W Description
0x13100 AcquisitionMode 4 RW
0: Continuous
1 : Single Frame
2: Multi Frame
3 : Single Frame Recording
4: Single Frame Readout
0x13110 AcquisitionStart 4 WO
Command : Not readable
0x13120 AcquisitionStop 4 WO Command : Not readable
0x20013438 AcquisitionFrameCount 4 RW Number of Frame to Acquire in “Multi Frame” Acquisition
Mode : from 1 to 255
0x4E0581D4
ExposureTime 4 RW Exposure Time for Preset 1 and default : From 1 to 65535
by Step of 0.1µs
0x4E05843C LinePeriod 4 RW Line Period (Internal Trigger Modes Only)
0x4E0581D8 LinePeriodMin 4 RO
Minimum Line Period possible
0x4E058358
ExposureDelay 4 RW Exposure Delay for Preset 1 and default. From 0 to 65535
by Step of 0.1µs
0x4E0581BC
ExposureTime_PR2 4 RW Exposure Time for Preset 2. From 1 to 65535 by Step of
0.1µs
0x4E058384
ExposureDelay_PR2 4 RW Exposure Delay for Preset 2. From 0 to 65535 by Step of
0.1µs
0x4E0581C0
ExposureTime_PR3 4 RW Exposure Time for Preset 3. From 1 to 65535 by Step of
0.1µs
0x4E058388
ExposureDelay_PR3 4 RW
Exposure Delay for Preset 3. From 0 to 65535 by Step of
0.1µs
0x4E0581C4
ExposureTime_PR4 4 RW
Exposure Time for Preset 4. From 1 to 65535 by Step of
0.1µs
0x4E05838C
ExposureDelay_PR4 4 RW Exposure Delay for Preset 4. From 0 to 65535 by Step of
0.1µs
0x4E058520 LineTriggerTimeout 4 RW
TimeOut to consider the Line Trigger as missing (in ms)
Triggers
0x4E05851C ExposureMode 4 RW
0: Off
1 : Timed
2: Trigger Width
0x4E058494 FrameTriggerSoftware 4 RW
Control the Frame Trigger (if Software enabled)
TriggerSelector
0 : Line Start,
1 : Exposure Active,
2 : Frame Start ,
3 : Frame Active
0x4E05849C TriggerMode_LineStart 4 RW
Validation of the Line Trigger Start (disabled if the
Exposure Active Trigger is enabled):
0: Off
1 : On
0x4E058340 TriggerSource_LineStart 4 RW
Source for the Line Start Trigger:
1 : Line Trigger 1
2 : Line Trigger 2
5 : Counter 1 End
6 : Counter 2 End
7 : Timer 1 End
8 : Timer 2 End
16 : Rotary Encoder Output
0x4E058350 TriggerActivation_LineStart 4 RW
Activation of Line Start Trigger :
0 : Rising Edge
1 : Falling Edge
0x4E06063C TriggerMaskActivation_LineStart 4 RW
Activation of Trigger Mask for Line Start Trigger :
3 : Level High
4 : Level Low
0x4E060634 TriggerMaskSource_LineStart 4 RW
Source for the Trigger Mask for Line Start Trigger :