Teledyne e2V EV71YC1CNT2010-BA0, User Manual

Page: 22 / 68

UM_NBASE-T_C
OLOUR
REV.E 09/2018 P
A G E
| 22
GenCP address GenICam Register
Size
(Byte
s)
R/W Description
0x12500 SensorWidth 4 RO
Active Pixels number of the Sensor
0x12500 Width 4 RO Total Pixels number outputted including MetaData
0x12510 Height 4 RW Set the Height of the image (1 to 16383)
0x12540 PixelFormat 4 RO
RGB8
- PixelSize 4 RO Bpp24(9) : 24bits RGB Pixel
- PixelColorFilter 4 RO None(0)
0x4E058074 TestImageSelector 4 RW
0 : “Off” (Sensor image)
1: “GreyHorizontalRamp”
2 : “whitePattern”
3 : “GrayPattern”
4 : “BlackPattern”
5 : “GreyVerticalRampMoving”
0x4E058118 ReverseReading 4 RW
0 : disable
1 : enable
0x4E058068 SensorMode 4 RW
Depending the model of the camera
0 : Full Definition Single (4k Model)
1 : True Color Single (2k Model)
0x4E05806C InputSource 4 RO
“Cmos Sensor Processing Chain ON”
0x4E058070 ScanDirection 4 RW
Set/Get Scan Direction (forward or reverse)
0: Forward
1: Reverse
2: Externally controlled
o
External Signal=0: Forward
o
External Signal =1: Reverse
0x4E058528 ScanDirectionSource 4 RW
Source for the External control of the Scan Direction :
0 : Line Trigger 1 (LT1)
1 : Line Trigger 2 (LT2)
2 : Frame Trigger (FT)
3 : L3
4 : L4
5 : L5
6 : L6
0x4E058398 MetaDataMode 4 RW
Meta Data Added at the end of each Line :
0 : disable
1 : enable
Regions of Interest
0x4E0582CC ROI_Number 4 RW
Set the number of ROI :
0 : No ROI. Default output is the full Sensor Width
1 to 4 : 1 to 4 ROI with no possible Overlap
- ROISelector
ROI1 to ROI4
0x4E0582D4 ROI1_Start 4 RW
Set the Pixel Start of ROI1 (0 to SensorWidth-1)
0x4E0582D0 ROI1_Width 4 RW
Set the Pixel Width of ROI1 (0 to SensorWidth-1)
0x4E0582E4 ROI2_Start 4 RW
Set the Pixel Start of ROI2 (0 to SensorWidth-1)
0x4E0582D8 ROI2_Width 4 RW
Set the Pixel Width of ROI2 (0 to SensorWidth-1)
0x4E0582E8 ROI3_Start 4 RW
Set the Pixel Start of ROI3 (0 to SensorWidth-1)
0x4E0582DC ROI3_Width 4 RW
Set the Pixel Width of ROI3 (0 to SensorWidth-1)
0x4E0582EC ROI4_Start 4 RW
Set the Pixel Start of ROI4 (0 to SensorWidth-1)
0x4E0582E0 ROI4_Width 4 RW
Set the Pixel Width of ROI4 (0 to SensorWidth-1)