UM_NBASE-T_C
OLOUR
REV.E
09/2018
P
A G E
|
65
C.3
Set of Heatsinks
The NBASE-T Cameras are already delivered with 2 Heat Sinks, but if necessary, additional heat sinks
are available (set of 2) and they can be fixed on any side of the front face :
Set of 2 x Heat Sinks : Part number AT71KFPAVIVA-CAA
The Camera has been designed to dissipates the maximum of the internal heat through its front face : The
packaging of the sensor is larger to increase the surface in contact with the front face and then improves the
dissipation. The first part (black) of the rear housing is also important for the Heat dissipation as it’s in contact
with the FPGA and is used to dissipate its temperature.
In the system, the camera has to be fixed by its front face with the largest contact possible with a metallic part.
Without any specific cooling system, a simple air flow around the camera will improve roughly the dissipation.
