TELEDYNE API T200U NOy, Operator'S Manual

Page: 35 / 38

Model T200U NOy Option Manual Addendum
07303E DCN7996 33
To start the Autotune procedure:
1. Press SEL until A7 (AT) is displayed
2. Press Data until value = 1 (enable Autotune)
•
While Autotuning, the decimal point LED will blink.
•
NOTE: During the procedure, it is normal for the temp to overshoot up to
100°C.
•
When the decimal point LED turns off, Autotune is complete. No further
adjustment should be necessary.
Table 6 Temperature Controller Programming Guide
PRESS DISPLAY ACTION
SEL
DATA
P PROP BAND UP/DOWN SET TO 5.0 (ENTER)
SEL
DATA
i
INTEGRAL SET TO 50
SEL
DATA
d DERIVATIVE TIME SET TO 15
SEL
DATA
AL LOW ALARM SETP SET TO 300
SEL
DATA
AH HIGH ALARM SETP SET TO 330
SEL
DATA
7C CYCLE TIME SET TO 2 (FOR FAST SYSTEM)
SEL HYS HYSTERESIS SET TO 0.3
SEL
LOC LOCK
0 = OPEN 1 = LOCKED
2 = SV ONLY OPEN
NOTE: DO NOT SET THE TEMPERATURE (SV) HIGHER THAN 320 o C.