TELEDYNE API T200U NOy, Operator'S Manual

Page: 13 / 38

Model T200U NOy Option Manual Addendum
07303E DCN7996 11
3.0 GETTING STARTED
The NOy converter has been designed to operate with the T200U low level NOx
analyzer, with some additional modifications. The combination is referred to as the
T200U NOy analyzer.
3.1 Unpacking and Inspection
The T200U NOy, comprised of four components, comes in three boxes:
•
The analyzer with AC power cord
• The 501 NOy Bypass Pump Chassis 501 with AC power cord
•
External Converter housed in a stainless steel NEMA 4 enclosure, and an
umbilical cable assembly (herein referred to as “Converter” or “external
Converter”)
• External Pump (herein referred to as “external Pump” not to be confused with
the 501 NOy Bypass Pump or Pump Pack)
1. Verify that there is no apparent shipping damage. If damage has occurred
please advise shipper first, then TAPI. (Keep original container and packaging
for shipper’s inspection).
2. Follow the unpacking instructions in the T200 Manual.
3. Please check the voltage and frequency label on the rear panel of the
instrument for compatibility with the local power before connecting the
instruments to a power source.
CAUTION!
Avoid personal injury: use two persons each to lift and carry the analyzer and the
Model 501 NOy Pump Pack chassis.