06161H DCN7969
Teledyne API Model 465H O
3
Monitor User Manual
29
7.2.
Front Panel Menus
The 465H has an interactive menu structure that can be operated from the front panel.
From within this menu structure, the operator can view real-time parameters such as
temperature and pressure, view configuration information, and edit setup parameters such
as alarm limits.
Figure 7-2 and Figure 7-3 below show the menu structure as well as the buttons that are
used to navigate it.
Starting with the display in Concentration mode, press
CFG
to enter Menu mode. At this
point the unit-of-measure LED should turn off and the first level of the Menu tree will be
active. Pressing the
UP
/
DOWN
arrows will now select from the items available at this
menu level. Press
ENT
to enter one of these sub-menus or press
CFG
to back out of this
menu level back to Concentration mode.
7.2.1.
Menu Navigation Basics
1.
Press
CFG
from Concentration mode to enter Menu mode.
2.
Once in Menu mode,
CFG
will move backwards one level in the menu structure
and
ENT
will move forward.
3.
Each menu level contains an EXIT selection. Selecting EXIT and pressing
ENT
will exit the Menu mode and return the display to Concentration mode.
7.2.2.
Editing Numeric Values
At certain places in the menu structure the operator can edit numeric values. The menu
buttons behave somewhat different when in this mode.
Press
CFG
to select a digit to edit. The selected digit will blink. Next press the
UP
/
DOWN
arrows to increment/decrement the selected digit. Press
CFG
again to select
another digit. Pressing
CFG
at the last digit will wrap back to the first digit.
Once all the digits have been edited, press
ENT
to accept the new value.
To abort the editing process without changing the original value, press and hold the
CFG
button until the display returns to the previous menu level.
NOTE
Limit checking is enforced, while editing values and changes that
would result in invalid values are ignored.
Summary of Contents for 465H
Page 2: ......
