24
Teledyne API Model 465H O
3
Monitor User Manual
06161H DCN7969
4.5.5.
Digital Serial Interfaces
There is one external communications port that can be configured for either the RS232,
RS485 (Half Duplex,) or Ethernet (10Mbit.) This section provides only a brief overview
of the digital serial connections. For more detailed information on configuring and using
the digital serial interfaces, see Section 8.
4.5.5.1.
RS232 Connection
With the instrument configured for RS232, connection can be made to the DB-9
connector, labeled “RS232/485”, or to the three “COM” pins on the “General I/O”
connector. See Section 8.2 for additional details.
When using RS232, a 9-pin serial cable (TAPI P/N WR77) can be used to connect the
instrument to a standard PC (personal computer) serial port.
4.5.5.2.
RS485 Connection
With the instrument configured for RS485, connection can be made to the DB-9
connector, labeled “RS232/485”, or to the three “COM” pins on the “General I/O”
connector. See Section 8.2 for additional details.
4.5.5.3.
Ethernet Connection
With the instrument configured for Ethernet, connection should be made to the RJ-45
port labeled “Ethernet.” Connection can be made using a standard Category 5 or better
network patch cable. See Section 8.2 for additional details. TAPI can provide an
appropriate cable.
Summary of Contents for 465H
Page 2: ......
