Telect, Inc. • USA +1.509.926.6000 • 52.33.3836.37.52
www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 117209-1 A0
Page 11
3.1 Operation
3.1.1 Monitoring
You can perform non-intrusive signal monitoring by connecting your test equipment to the front
monitor jack (labeled M).
Figure 6 - Non-intrusive Signal Monitoring
3.1.2 Loopbacks
To temporarily loop the repeater’s OUT port to its IN port, fully insert a mini-WECO looping plug
into the I/O jacks.
Figure 7 - Inserting a Mini-WECO Looping Plug
Monitor Jack
Test
Equipment
