Telect, Inc. • USA +1.509.926.6000 • 52.33.3836.37.52
www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 117209-1 A0
Page 6
Figure 3 - Network Element Locations
2.1 Installation
2.1.1 Installation Considerations
CAUTION
!
CAUTION! Only qualified technicians may install and maintain this product.
ALERT
!
ALERT! These instructions presume you have verified that the Telect equipment being in-
stalled is compatible with the rest of the system, including power, ground, circuit protec-
tion, signal characteristics, equipment from other vendors, and local codes or ordinances.
ALERT
!
ALERT! This repeater module contains static-sensitive components. To prevent equip-
ment damage, wear a properly connected grounding strap while handling the module and
store it in its original anti-static bag when not in use.
2.1.1.1 Location and Space
The BCS II Simplex Repeater module occupies one slot in any vertical BCS II chassis or in the
Vector chassis. Do not install more than five repeater modules in a BCS II chassis. The Vector
Chassis can be fully populated with repeaters.
You must install two repeaters to complete the
cross-connect, one repeater for each network element.
2.1.1.2 Tools and Equipment
No special tools or equipment are required. Wear a grounding strap during installation.
Simplex
Repeater
I
O
IX
OX
RX
TX
Simplex
Repeater
IX
OX
I
O
NE 2
RX
TX
NE 1
Up to 900 ft (using RG-59/734)
Up to 900 ft (using RG-59/734)
