Telecrane F21-12D Manual Download Page 17

Page: 17 / 31

TCM260904

Rev

0.1

TCM260904

Page 17 of 31

AST

EST

USHBUTTON

UNCTION

ETTING

Item Title

Options

Description

A Interlock 1.

Interlock

Non-Interlock

“Interlock”:

If the motions cannot be operated

simultaneously then select “Interlock”.

“Non-Interlock”:

If the motions are allowed to operate

simultaneously then select “Non-Interlock”.
This item is selectable only when East and West
pushbuttons are set at “Normal” function.

East: West:

1. Normal Normal

2. Toggle Normal

3. Toggle Toggle

4. On

Off

B Function

“Normal”:

The associated relay is “on” when the

pushbutton is pressed and held, and is “off” when the
pushbutton is released.

“Toggle”:

Press the pushbutton and release once for “on”,

re-press and release for “off”.

“ON & OFF”:

The two pushbuttons are set to

respectively control the same relay. If a pushbutton set as
“on” is pressed and released, then the relay remains
closed. No other pushbutton can change the status of this
relay except the pushbutton set as “off”.

OUTH

ORTH

USHBUTTON

UNCTION

ETTING

Item Title

Options

Description

A Interlock 1.

Interlock

2. Non-Interlock

“Interlock”:

If the motions cannot be operated

simultaneously then select “Interlock”.

“Non-Interlock”:

If the motions are allowed to operate

simultaneously then select “Non-Interlock”.
This item is selectable only South and North pushbuttons
are set at “Normal” function.

South: North:

1. Normal Normal

2. Toggle Normal

3. Toggle Toggle

B Function

4. On

Off

“Normal”:

The associated relay is “on” when the

pushbutton is pressed and held, and is “off” when the
pushbutton is released.

“Toggle”:

Press the pushbutton and release once for “on”,

re-press and release for “off”.

“ON & OFF”:

The two pushbuttons are set to

Summary of Contents for F21-12D
































Search results

Summary of Contents for F21-12D

Reviews:

Related manuals for F21-12D

Brands by name

Popular brands

Telecrane F21-12D, Manual

Search results

Summary of Contents for F21-12D

Reviews:

Related manuals for F21-12D

Brands by name

Popular brands