TeleCorder TCwL-B4, User Manual

Page: 6 / 26

Tele Corder # TCwL-B4, V2.43, Revision 4, USA
5
with two of the MTJ-S2 splitters (see image on right) to provide
individual jacks for each input and four T-18 cable sets for
connecting to phone lines.
If you wish to record from multiple line analog phones or
digital telephone sets, instead of individual phone lines, the most
popular way to connect is with a handset splitter or handset audio tap
such as the Omnicron TSA-3LM, TSA-2A1, or TSA-SLM that are
available from your
Tele
Corder representative. Your sales
representative can also assist you in selecting other cables or
adapters to simplify installation for your application.
If it is not convenient or possible to install using standard modular jacks, identify the pair of wires for
each line or audio source and connect in parallel to each individual input on the
Tele
Corder .
With bundled phone wiring, you must first identify the line pairs among the wiring cables and then
connect
the wires from the
Tele
Corder inputs to these pairs. Equipment and wiring diagrams may be
required to expedite proper installation. Check with your phone or wiring provider for assistance as needed.
The
Tele
Corder connects in parallel to your audio sources.
2.2 Power Connection
Plug the supplied 5 volt power supply (photo at right) into a standard 110v
AC outlet and connect its output cable to the
Power +5vDC
jack on the
back of the Tele Corder . A blue LED on the front of the recorder will
indicate that power is connected. It can take up to 30 seconds to boot-up.
There are LEDs on the front of the recorder that will indicate recorder
activity, including one for each of the four channels.
2.3 Installing Software and Connecting to a PC (Win-2000/XP/Vista/Win-7 32/64)
If connecting a Tele Corder to a PC that has a previous version of the Tele Corder product, you have to
remove the previous software and old .dll files. Go to
PC Start Menu > Control Panel > Add or Remove
Programs
.
Look for the
.dll
file name
FTD2XXX
and remove it. Then scroll down to
Tele
Corder software
and remove it. You are now ready to install the new software and drivers.
Install
Tele Corder software onto your PC from the CD included with your recorder prior to connecting
the recorder to a USB port on the PC or to your network via the LAN connection.
See
“Read-Me”
notes on software CD for additional information and for instructions that will permit
you to update older Tele Corder recorders so that they can be used with a Win-7 and/or a 64-bit PC.