Tele
Corder
# TCwL-B4, V2.43, Revision 4, USA
17
Tele
Corder
Recording
List
will
show
only
those
files
and
needs
to
be
refreshed
to
show
all
calls.
Each file refers to a unique record. The name of each file contains date and time of the call,
caller or dialed number such as File
P2 10-26-10 09=11=10 DIAL TO 18609280377.WAV
(recording made on
Tele
Corder
Port
2
on
October
26th, 2010 at 09:11:10, call was outgoing and
dialed to 1-860-928-0377). The files are suffixed with “.Wav”. You can change the file names as
required, but you should not change the suffix unless there are special requirements.
Volume Balance Setting (DAVA):
D
igital
A
utomatic
V
olume
A
djustment capabilities. This is
done in software, not hardware. If the volume levels of the 2 sides of a conversation are different,
or if the line quality is not well adjusted, the Digital Automatic Volume Adjustment (
DAVA
)
function will amplify the lower or far side to more closely match the level of the stronger or near
side of a recorded conversation during playback. Since background noise will also be amplified
together with the sound, there will be a compromise to permit weak voices to be played at higher
levels without raising background noise levels to objectionable levels. There are 2 possible
settings:
USE DAVA
(auto volume adjustment) for Volume Balance:
This setting is normally used
to enable
DAVA
when converting single files or batches of files to wave
files. It provides a medium amount of boost for weak audio.
DEEPER DAVA
Mode (may have more noise):
This setting provides a higher level of boost
to weak audio but may also increase weak background noise levels.
5.1.8
Print and Save the List of Records:
The displayed list on the screen can be printed or saved
into a “.txt” file. No matter how the call list is re-ordered, the searched and sorted list can be printed.
5.1.9
Delete Recordings:
The
recorded
calls
can
be
selectively
or
entirely
deleted.
To
avoid
unauthorized deletion, the password must be entered before deleting recordings. If no password has been
set, you will need the master password that was supplied with your
Tele
Corder
. Options are to delete the
most recent recording, all recordings, or a selected range of recordings. Unanswered is not supported with
TCwL-B4 recorders.
From Delete Item(s) box click on
Select Range
button and follow screen messages to select which
recordings you wish to delete from the recorder’s hard drive. After selecting which recordings to delete,
you will be provided with an option to “
Confirm: Files are deleted as desired?
”. Follow on screen
instructions to recover the recordings as needed. If file recovery is selected, recovery will take place when
the
Tele
Corder
software is closed and re-opened. Recordings made after selecting recovery and re-opening
the software will be permanently lost.
5.1.10 Hardware:
From
the
Info & Settings
button
you
can
access
all
of
the
recorder’s
hardware
and
information
settings: