SEECTOR User Manual
seector00.doc 27.04.00
27
Mute and dime controls the output level of the monitor while the
monitor location is on air. This means that whenever a microphone in
that room is open the level is either muted or dimmed.
When source change while OnAir is selected the monitor output will
automatically change to the selected source whenever the monitor is
on air. This is useful when a "mix minus studio" is created for the
studio speakers. This selection can also be used in conjunction with
dim while OnAir.
Dim while talkback sets the dimming level for the monitor output
whenever a talkback is originated in that room. This dim level is also
used by the DIM switch on the monitor panel.
6.6 Other monitor options
During configuration the destination of PFL, SOLO and talkback is
decided. These can be directed to replace the selected audio in any
monitor output.
C
