SEECTOR User Manual
seector00.doc 27.04.00
17
The filter switch switches the filter in or out of circuit.
If a filter is not available for the source, the switch has no effect, and
the filter section is dark.
The equaliser switch switches the equaliser in or out of circuit.
If an equaliser is not available for the source, the switch has no effect,
and the equaliser section is dark.
The insert switch switches the insert point in or out of circuit.
If an insert point is not available or defined for the source, the switch
has no effect, and the insert section is dark.
The dynamics switch switches the dynamics section in or out of
circuit.
If a dynamics section is not available or defined for the source, the
switch has no effect, and the dynamics section is dark.
The block diagram gives the availability.
Pan/Bal control
•
Pan/bal rotary control
•
Light bar
•
Pan/bal on switch
For mono sources the rotary control position the audio in a stereo
image.
For stereo sources the rotary control adjusts the level of left and right
channel.
When the pan switch is not active the Pan/Bal rotary control has no
effect, and audio is routed equally to both left and right destination.
4.1.3 Input section in
assign window
In the assign window channel
diagram the mono/stereo
mode and gain settings are
shown in the input icon.
4.1.4 Input menu
This menu shows detailed
information about the source
properties. All settings
performed by the main assign
panel are available in this
menu.
C
