SEECTOR User Manual
seector00.doc 27.04.00
4
A user surface handles one assign panel which may be assembled by
several different panels.
1.2.3 Selections and lists.
The configurable nature of the console leaves many connections in
the block diagram open for the operator to connect. Sources must be
assigned to faders, mixing buses to outputs, insert points to channels
and many more.
Whenever the operator has to do a selection, the options are
presented in the form of lists displayed on the screen. The lists
appear when the selection is started (i.e. rotation detected) and stays
on the screen for a period of time. The new selection is established
as soon as the selection is stopped (i.e. end of rotation).
To avoid unnecessary selections in long selection lists the console
has a system to reduce the size of the lists. All selections are also
stored in the user presets.
1.2.4 Short and long push.
On some buttons there is a distinction between long and short
pushes. A short push activates a toggling function that is indicated by
the button illumination. A long push is detected when the button is
pressed down continuously for a longer period (Programmable.
Approx. 0.6s). The long push activates a momentary function without
changing the toggling status.
1.2.5 Routing concept
Routing is the operation where the input channels are connected to
the different summing buses. On the Seector there is no dedicated
routing switches. A long push on an assign switch activates the
routing status.
The involved faders are all input faders and those output faders that
have summing buses as sources.
Input channels
A long push on the assign switch on an input fader panel activates
the routing mode.
If the selected source is routed to a sum, the output fader will turn the
assign switch on.
The routing connection can now be toggled on and off by pushing the
output fader's assign switch.
One input can be routed to several sums.
Output channels
A long push on the assign switch on a destination fader panel with a
summing bus source activates the routing mode.
Any input fader panels routed to the summing bus is turned on.
The routing connection can now be toggled on and off by pushing the
input fader's assign switch.
