Installation instructions
│
R2
│
Chapter 6: Status and error indications on the
stationary unit
CHAPTER 6: STATUS AND ERROR INDICATIONS
ON THE STATIONARY UNIT
: LED is lit.
: LED is off.
²
: LED is blinking (red);
: LED is blinking (yellow);
LED 1
(green)
LED 2
(yellow)
LED 3
(red)
Indicates
○
No power to the receiver
●
Receiver is powered up
●
●
The stationary unit is in registering mode
(activated by a 'register' command from the
customer host system). The unit will not respond
to any Modbus commands while in registering
mode. The unit stays in registering mode for 10
s.
Modbus packages sent to this unit are being
received on either RS232 or RS485.
²
Radio packages are being sent and received on
the same channel as the stationary unit.
²
with 2 s
interval
The unit cannot read the start-up information,
such as ID code. Contact your representative for
assistance.
²
with 4 s
interval
The flash memory may be damaged. contact your
representative for assistance.
IM-LX-RX101-EN-v01
19