Installation instructions
│
R2
│
Chapter 4: Product general description
4.2 .1 I N S T A L L A T I O N PREC A UT I O N S
RISK OF ELECTRIC SHOCK
The receiver must only be opened by qualified installers or authorized
personnel.
Make sure the power supply is switched off before opening the receiver.
Failure to follow these instructions could result in death, serious injury,
or equipment damage.
IMPORTANT! Only authorized personnel should install the product.
Only correct installation complies with the safety levels for the product.
l
A permanent installation of the receiver must include fuses in order to
protect the equipment and cables from short circuit.
l
The receiver must be installed vertically, on a flat and rigid surface, with the
cable at the bottom.
l
Install the receiver in a location where it is easily visible.
Mount the receiver in a location where the LEDs and buttons inside the
receiver are easily visible and accessible, e.g. for troubleshooting operations.
l
Consider the wiring limitation and the radio communication limitation to
choose the receiver location.
l
Ensure no obstacle is impairing the radio communication performance
between the receiver and the transmitter.
l
The receiver must not be installed inside closed metal containers.
l
Make sure any accessories inside or on the receiver are installed before
permanently installing the receiver.
l
Test the equipment before installing the receiver permanently.
16
IM-LX-RX101-EN-v01