A C C E S S 2 1 1 V O I P G A T E W A Y ( A C - 2 1 1 ) U S E R G U I D E
MN100129 Rev A01
19
2.
To enable the DHCP Server, select the
Server Settings Enabled
option.
3.
Fill in the following fields:
•
Client IP Address range – up to 10 IP addresses are allowed. To change the LAN
IP, see
•
Domain Name – optionally enter the domain name for the local LAN.
•
DNS Server 1 and 2 – if left blank, the DNS Server IP addresses will be acquired
from the WAN connection. If you want to use different DNS Server addresses,
enter their IPs.
•
You can define LAN devices statically. The devices can be defined by Host
name or by MAC address:
o
Identity Using – Select the type of identifier, Host name or MAC,
you wish to use in the next field.
o
Host Identifier – Enter the appropriate value (Host name or MAC).
o
Internal address – static IP of the local host.
4.
To view the DHCP Client table (Figure 8), click on
View DHCP Table
.
