SS02 - USER MANUAL
Space Scan Series
Photoelectric measurement light curtains
Website: www.telcosensors.com
Warning
V 1.6 Part Number:
L40-0666220746
E-Mail: [email protected]
This device is not to be used for Personnel Protection in Machine
Guarding Safety applications. This device does not include the self-
checking redundant circuitry necessary to allow its use in personnel
machine guarding stand-alone safety applications.
April 2019 edition
Made in Denmark
Telco A/S reserves the right to make changes without prior notice
Page 3 of 7
tel
!
EN
File menu
RS485 Serial Port and Modbus Setup:
See SSR02 and PC connection.
Search for Telco light curtains on a Modbus.
Used for finding and identifying the Modbus address(es) of one or more light curtains on the
Modbus. For more info see below.
Connect
See SSR02 and PC connection.
Load configuration
Used to load a file that will configure all functions of the light curtain in one go. The information
is stored in a previously saved configuration file in ASCII format.
Save configuration
Saves information about the current configuration of the light curtain.
Colour Preference
It is possible to set up to 7 different colours for the beams on the screen.
Exit
Exit and close the program.
Language
Language selection.
File -> Search for Telco Light curtain on a Modbus
Use this function to find the
Modbus Address(es)
of Telco Light curtains on a Modbus, if the address(es) are unknown.
Functions menu
Overview:
For configuration of outputs and measurement functions and for reading output states.
System Information:
For basic system information and configuration of Modbus address.
Status Messages:
Status messages are logged and displayed by choosing this menu item.
Each functions associated with each of these menu items will be described in detail the
following.
Functions -> Overview -> General Setup tab
General Setup
:
Right side shows the light curtain and the beam pattern. Unbroken or made beams are indicated by green and broken beams by red. The light curtain is in the setup oriented with the cable entry in the
bottom.
