TEL TAVRIDA ELECTRIC VCB15 LD, User Manual

Page: 6 / 93

7
1.4 Disclaimers
Tavrida Electric will not accept any claims for damages caused by improper transport, storage as well as
unpacking. Transport damage must be reported in writing to the supplier as soon as it is discovered.
The present User Guide contains information necessary for the installation, commissioning and operation. It is
absolutely necessary for the proper use of the Vacuum Circuit Breakers to read the User Guide carefully before
starting and to adhere to the instructions and the relevant regulations. Tavrida Electric will not accept any claims
for damages caused by improper usage of the Vacuum Circuit Breakers. In case of special configurations please
contact Tavrida Electric prior of usage of the Vacuum Circuit Breakers.
1.5 Precautions
• Check whether the installation position (distances, spatial separation, and the surroundings) is suitable for the
switching devices.
• Installation, operation and maintenance shall only be carried out by trained and experienced personnel who
are familiar with the equipment and the electrical safety requirements.
• During installation, commissioning, operation and maintenance of the equipment the relevant legal regu-
lations (such as DIN/VDE/IEC), accident prevention regulations and the connecting conditions of the electric
utilities shall be followed.
• Take note that during operation of the Vacuum Circuit Breakers certain parts are subject to dangerous voltage.
Mechanical parts, also remote-controlled, can move quickly. Failure to comply may result in death, severe per-
sonal injury or damage to equipment.
• Pay attention to the hazard statements located throughout this User Guide.
• The operating conditions of the vacuum circuit breakers shall comply with the technical data specified in this
User Guide.
• Personnel installing, operating and maintaining the equipment shall be familiar with this User Guide and its
contents.
1.6 Warranty
Unless otherwise stated in the contract, the warranty period is stated in Standard warranty policy. If agreed to
otherwise, the contract conditions apply. No warranty is given in the case of …
a) … the warranty period having run out during the period of storage with the customer;
b) … the operating conditions, ambient conditions, transport and storage conditions have not been adhered to
according to the application description or the Installation and Operating Instructions;
c) … an unauthorized manipulation of the device has been carried out, such as opening the housing or
damaging the seal;
d) … the device has not been properly installed, such as incorrect connection of supply voltage of auxiliary
circuits.