Tekvox TEK-MHD44TP 79055, User Manual

Page: 21 / 28

TEK-MHD44TP 4x4 HDBaseT Matrix
TEKVOX, INC. 15 www.tekvox.com
210.348.6565
%9971. Check the connection status of the inputs.
%9972. Check the connection status of the outputs.
%9973. Check the HDCP status of the inputs.
%9974. Check the HDCP status of the outputs.
%9975. Check the switching status.
%9976. Check the output resolution.
%9977.
Check the status of digital audio of output
channels.
EDIDH[x]B[y].
Copy the EDID from output port [x] to input port [y].
If the EDID data is correct and the audio part does
not support PCM mode, then force-set PCM mode.
If the EDID data is not correct, then set it as
initialized EDID data.
EDIDG[x].
Get EDID data from the output and display the
output port number of X.
EDIDMInit. Recover the factory default EDID data.
EDIDUpgrade[x]
.
Upgrade EDID data via the RS-232 port
[X] is for input port. When the value of X is 5,
upgrade all 4 input ports. When the switcher gets
the command, it will show a message to send
EDID file (.bin file). Operations will be canceled
after 10 seconds. (Note 1)
UpgradeIntEDID[x].
Select one type of EDID data and upgrade built-in
EDID data. Supports 4 types of EDID data:
1. 1080P, 2D, PCM2.0
2. 1080P, 2D, 5.1 (audio)
3. 1080P, 3D, PCM2.0
4. 1080P, 3D, 5.1 (audio)
[x] = 1, 2, 3 or 4
When the switcher gets the command, it will show
a message to send EDID file (.bin file). Operations
will be canceled after 10 seconds.
EDIDM[X]B[Y].

Copy the EDID data of output[X] to the input[Y]. Only
for HDBaseT outputs. Do not use the Local HDMI
outputs.
Notes :
1. Disconnect all the HDBaseT cables before sending command EDIDUpgrade[X].
2. In above commands, “[”and “]” are symbols for easy reading and do not need to be typed in actual
operation.
3. Please remember to end the commands with the ending symbols “.” and “;”.
4. Commands are case-sensitive.