Tekvox TEK-MHD44TP 79055, User Manual

Page: 15 / 28

TEK-MHD44TP 4x4 HDBaseT Matrix
TEKVOX, INC. 9 www.tekvox.com
210.348.6565
IR Carrier Enforcing:
a)
IR carrier must be present on the HDBaseT receiver for the IR signal to be transferred to the IR
OUT port of the matrix.
b)
IR carrier must be present on the IR ALL IN port of the matrix for the IR signal to be transferred to
the IR OUT port of the matrix.
c)
If the IR receiver is connected with an HDBaseT receiver or IR ALL IN port of the matrix is not with
IR carrier, you need to send the command
“
%0901.
” to transfer the IR signal to IR OUT port.
Control far-end output device from local
To control a remote display from the local IR receiver, IR carrier must be present on the IR ALL IN
port. The IR signal is transferred to the corresponding zone connected with an HDBaseT receiver that
has an
IR transmitter . When the IR receiver is connected to IR ALL IN port, the IR signal can be
transferred to all 4 IR transmitters connected with HDBaseT receivers.
See figure below: